RoadStar Medium Setting (MS) Emulsion
In this rate of deposition of bond is sufficiently delayed to permit mixing with certain fine aggregates before breaking to form a continuous adhesive film without stripping. RoadStar Medium Setting (MS) Emulsion is ideal for pot hole repair/patch work as it is easy to use and provides stable patches
Technical Specifications Table
|Technical Requirements of Bitumen Emulsion (Cationic Type)|
|1.||Residue on 600 micron IS sieve (Percent by mass) Max.||0.05|
|2.||Viscosity by Saybolt Furol Viscometer,Sec
50 – 300
|3.||Coagulation of Emulsion At low temperature||Nil|
|4.||Storage Stability after 24 hrs. Percent Max.||1|
|6.||Coating ability and water resistance
(a) Coating dry aggregate
(b) Coating after spraying
(c) Coating,wet aggregate
(d) Coating after spraying
|7.||Stability to mixing with cement(percentage coagulation)Max.||–|
|8.||Miscibility with water||No coagulation|
|9.||Tests on residue:
(a) Residue by evaporation percent Min.
(b) Penetration 25Â°C/100g/5sec/1/10 mm.
(c) Ductility 25Â°C/cm Min.
(d) Solubility in trichloroethylene Min.%
|10.||Distillation percent,by volume at:
|11.||Water content, percent by mass, Max||—|